108-3

Double 50mm x 25mm cut-outs, for double skin doors, die-cast zinc alloy, vandal resistant

Double 50mm x 25mm cut-outs, for double skin doors, die-cast zinc alloy, vandal resistant - 108-3

For cabinets, enclosures and door panels with an outer skin and inner skin, the 108-3-1F-1F is an excellent choice. Suitable for applications with an outer skin of up to 3mm thickness and a gap of between 10mm and 30mm between the skins. Enhanced weather resistance is achieved through a new design of dust cover. This is a self-closing hinged flap that is kept shut with a magnet, yet is easily raised to access the lock or cylinder drive. This swing handle features a spring loaded, slam action.

Fits standard 70mm x 32mm double cut-outs in the outer skin and the common double 50mm x 25mm cut-outs in the inner skin, both with hole centres 100mm apart. The thin external profile is styled to give a smart appearance to any application.

The swing handle comes in one of three security levels: a high security, brass radial pin tumbler lock; a lower security die-cast zinc alloy cylinder lock; or one of three popular industry-standard drives that provide basic resistance to tampering. The types of drive available are: 5mm double bit drive, 8mm square drive or 9mm tri-drive / triangular drive.

The body and handle are die-cast zinc alloy (DIN-EN 1774-ZnAl4Cu1), which can be specified with a chrome plated or black powder coated finish. The lock is either brass or die-cast zinc alloy and the cam is made from steel. The weather-resistant seals are polyurethane. Easy mounting is achieved with two brackets and just three screws (supplied).

Suitable for a wide range of outdoor applications, including roadside and trackside cabinets, wall boxes and motor control centres.