Corner hinges
197 - Die-cast body corner hinge, 25mm long, 180°
Die-cast body corner hinge, 25mm long, 180°
197
This compact corner hinge is suitable for panel thicknesses of 1.5mm. The hinge pin is available in steel or hardwearing thermoplastic. Secured with an M5 bolt. Typical applications are small electric panels.
 097 - Die-cast body corner hinge, 30mm long, 180°

Die-cast body corner hinge, 30mm long, 180°
097
The permutations for this compact corner hinge are for panel thicknesses of 1mm – 1.2mm or 1.5 – 2mm, steel or hardwearing thermoplastic pin and chrome plated or black powder coated. Secured with an M6 bolt.
297 - Die-cast body corner hinge, 30mm long, 180°
Die-cast body corner hinge, 30mm long, 180°
297
The permutations for this compact corner hinge are for panel thicknesses of 1mm – 1.2mm or 1.5, steel or hardwearing thermoplastic hinge pin and chrome plated or black powder coated. Secured with an M6 bolt.
 098 - Die-cast body corner hinge, 37.5mm long, 180°

Die-cast body corner hinge, 37.5mm long, 180°
098
Fitted with a steel hinge pin. Available chrome plated or black powder coated. Secured with M6 countersunk screws.
298 - Die-cast body corner hinge, 37.5mm long, 180°
Die-cast body corner hinge, 37.5mm long, 180°
298
Fits a cut-out of two 8.5mm square holes, 25mm apart. Fitted with a steel hinge pin. Available chrome plated or black powder coated.
400 - Die-cast or polyamide body corner hinge, 34mm long, 180°

Die-cast or polyamide body corner hinge, 34mm long, 180°
400
Fitted with a steel welding part and steel hinge pin. Available black powder coated die-cast or black polyamide. Secured by two M5 bolts and two M5 studs.
200 - Die-cast body corner hinge, 40mm long, 180°
Die-cast body corner hinge, 40mm long, 180°
200
Fitted with a steel welding part and steel hinge pin. Secured with either two M6 bolts and two M6 studs or with four M6 bolts. Black powder coated finish.