LOCKING RODS AND ACCESSORIES Product Range

Locking rods and accessories
	8mm round rod, with eye and pointed end IC-1 Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.	8mm round rod, with twin rollers and bare end IC-2 Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.
	8mm round rod, with twin rollers and eye end IC-3 Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.	8mm round rod, with twin rollers and eye end at 90° IC-4 Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.
	8mm round rod, with eye and bare end IC-5 Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.	8mm round rod, cranked, with twin rollers and bare end IC-6 Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.
	Rod adaptor CT Die-cast zinc alloy construction. Converts 8mm round rod for multi-point locking systems to an eye end.	Round rod guide CY Polyamide guide for 8mm round rod. Available in three heights, for rod clearances of 20mm, 24mm and 26mm. Fixed with an M6 screw.
	14mm flat rod with attached twin rollers IL-1 Supplied in the standard 1,020mm length and 14mm width, with 13mm, 16mm, 21mm or 27mm of crank.	14mm flat rod with integral twin rollers IL-2 Supplied in the standard 1,020mm length and 14mm width, with 16mm or 21mm of crank.
	14mm flat rod with locking pins IL-3 Fitted with 8mm diameter locking pins. Supplied in 14mm width, with 575mm between the centre of the pins or in other lengths to special order.	Round rod guide LY Polyamide guide for 14mm flat rod. Fixed with an M6 screw.
	Twin roller catcher, die-cast LKY-1 Zinc plated die-cast alloy. Fixed with two countersunk M6 bolts.	Twin roller catcher, steel LKY-2 Zinc plated steel. Fixed with two countersunk, 6mm diameter bolts.