Fits a 37.3mm wide x 25.3mm high cut-out. Made from ABS plastic. Suitable for small metal machinery covers.

Fits a 90mm wide x 49.5mm high cut-out. Made from ABS plastic. Suitable for large metal machinery covers.

Fits a 90mm wide x 49mm high cut-out. Made from ABS plastic. Suitable for large metal machinery covers.

Manufactured from 16mm wide by 2.5mm thick zinc plated steel. Supplied in three lengths: 135mm, 202mm and 292mm. Available in left hand or right hand operation.

Fitted under the bezel of a quarter turn lock with a standard 22.2mm diameter, 20.2mm wide body, this provides a handle with which to pull open the door, panel or cover. Manufactured from polyamide.

This steel washer has protruding teeth to reduce the likelihood of rotation when a lock is fitted in a circular hole. Zinc plated finish.

A polyurethane cap that fits on any lock requiring a 22.2mm diameter/20.2mm square cut-out. Encloses the face of the lock, helping to prevent rain and moisture from entering the keyway and causing corrosion. Normally, this item is available only with a lock.

For use on wooden applications. The die-cast zinc alloy fixing plate is zinc plated and has two pips that press into the wood and prevent the lock rotating. For use with a quarter turn lock with a standard 22.2mm diameter, 20.2mm wide body.

For use on thick doors and panels, such as isolator covers. The steel fixing plate is zinc plated and has a cut-out for a quarter turn lock with a standard 22.2mm diameter, 20.2mm wide body. Effectively increases the length of the lock by 21mm.

Fitted into electric & electronic panels, generators, enclosures and cabinets, these allow gauges, meters and counters to be viewed without the need to open the door. Available for a 90mm square or 155mm wide x 115mm high cut-out.

A range of five sizes, M8 M10 M12 M14 and M16, which will carry a weight of between 140kg and 700kg.

A range of six cage nuts that fit a 6mm, 9mm or 12mm square hole to take M5, M6 or M8 bolts, respectively. Panel thicknesses that can be accommodated range from 0.7mm to 4.1mm.

ABS plastic drawing pockets that hold either A4 or A5 documents. Features cut-outs to facilitate easy identification of document presence and easy document removal.