A range of 21 flat and cranked, square punched, steel cams with one leading and one trailing edge, to help achieve a snug door or panel fit. The stop lip prevents the cam rotating more than 90°.

A range of eight flat and cranked, square punched, steel cams with one leading and one trailing edge, to help achieve a snug door or panel fit. The stop lip prevents the cam rotating more than 90°.

A range of three steel cams fitted with two M5 studs and having one leading and one trailing edge, to help achieve a snug door or panel fit. The stop lip prevents the cam rotating more than 90°.

A range of ten square punched, steel cams varying in length from 29mm to 66mm with one leading and one trailing edge. Types include flat cams and 3mm, 6mm, 7mm and 10mm cranked cams. The stop lip prevents the cam rotating more than 90°.

A range of ten square punched, stainless steel cams with one leading and one trailing edge. The majority are 45mm in length and the range includes both flat cams and up to 12mm cranked cams. The stop lip prevents the cam rotating more than 90°.

A range of four square hole, plastic cams. The types include flat cams of 35mm and 45mm in length, a 4mm cranked cam that is 45mm long and a 6mm cranked cam that is 35mm long. The stop lip prevents the cam rotating more than 90°.

A range of 15 square punched, steel cams varying in length from 29mm to 66mm with one leading and one trailing edge, to help achieve a snug door or panel fit. Types include flat cams and 3mm, 4mm, 6mm, 7mm, 10mm and 12mm cranked cams.

A range of ten square punched, stainless steel cams with one leading and one trailing edge, to help achieve a snug door or panel fit. The majority are 45mm in length and the range includes both flat cams and up to 12mm cranked cams.

A range of three square punched, steel cams fitted with two M5 studs and having one leading and one trailing edge, to help achieve a snug door or panel fit.

A range of four square hole, plastic cams. The types include flat cams of 35mm and 45mm in length, a 4mm cranked cam that is 45mm long and a 6mm cranked cam that is 35mm long.

A range of three actuator plates with studs suitable for converting cams into multi-point locks. Available with or without a stop lip to prevent the cam rotating more than 90°.

A range of seven flat and cranked, square punched, steel cams specifically for the 050, 150, 250 and 072 ranges of quarter turn locks.

A range of five flat and cranked, square punched, 13mm wide, steel cams specifically for the 050, 150, 250 and 072 ranges of quarter turn locks. The stop lip prevents the cam rotating more than 90°.

A range of eight flat, cranked or hooked steel cams, punched with a cross shaped hole, specifically for the 050, 052, 053 and 054 ranges of quarter turn locks.

A range of eight flat, cranked or hooked, ‘double D’ punched, steel cams specifically for the 057 range of quarter turn locks.