Rectangular cut-out quarter turn cam locks
003 - Single 50mm x 25mm cut-out, cylinder drive three point lock, for gearbox-operated rods, IP65 rated
Single 50mm x 25mm cut-out, cylinder drive three point lock, for gearbox-operated rods, IP65 rated
003
This compact unit fits a single 50mm x 25mm cut-out. Available with one of three industry-standard drives, 5mm double bit, 8mm square or 9mm triangular. Polyamide body and die-cast zinc alloy gearbox.
103-1 - Single 50mm x 25mm cut-out, cylinder drive cam lock, IP65 rated

Single 50mm x 25mm cut-out, cylinder drive cam lock, IP65 rated
103-1
This compact unit fits a single 50mm x 25mm cut-out. Available with one of a wide range of 46 industry-standard drives. Polyamide body.
103-5 - Single 50mm x 25mm cut-out, cylinder drive three point lock, for gearbox-operated rods, IP65 rated
Single 50mm x 25mm cut-out, cylinder drive three point lock, for gearbox-operated rods, IP65 rated
103-5
This compact unit fits a single 50mm x 25mm cut-out. Available with one of three industry-standard drives, 5mm double bit, 8mm square or 9mm triangular. Polyamide body and die-cast zinc alloy gearbox.
103-2 - Single 50mm x 25mm cut-out, cylinder lock or non-locking, with wing knob, for gearbox-operated rods, IP65 rated

Single 50mm x 25mm cut-out, cylinder lock or non-locking, with wing knob, for gearbox-operated rods, IP65 rated
103-2
This compact unit fits a single 50mm x 25mm cut-out. Available with either a cylinder lock or non-locking. Polyamide body and die-cast zinc alloy gearbox.
103-3 - Single 50mm x 25mm cut-out, three point lock with T-handle, for gearbox-operated rods, IP65 rated
Single 50mm x 25mm cut-out, three point lock with T-handle, for gearbox-operated rods, IP65 rated
103-3
This compact unit fits a single 50mm x 25mm cut-out. The T-handle is available either with a cylinder lock or non-locking. Polyamide body and handle, with die-cast zinc alloy gearbox.
 103-4 - Single 50mm x 25mm cut-out, three point lock with L-handle, for gearbox-operated rods, IP65 rated

Single 50mm x 25mm cut-out, three point lock with L-handle, for gearbox-operated rods, IP65 rated
103-4
This compact unit fits a single 50mm x 25mm cut-out. The L-handle is available either with a cylinder lock or non-locking. Polyamide body and handle, with die-cast zinc alloy gearbox.
203-1 - Double 50mm x 25mm cut-outs, cylinder drive cam lock, IP65 rated
Double 50mm x 25mm cut-outs, cylinder drive cam lock, IP65 rated
203-1
Fits the common double 50mm x 25mm cut-out, which has hole centres 100mm apart. Available with one of a wide range of 46 industry-standard drives. Polyamide body.
 203-5 - Double 50mm x 25mm cut-outs, cylinder drive three point lock, for gearbox-operated rods, IP65 rated

Double 50mm x 25mm cut-outs, cylinder drive three point lock, for gearbox-operated rods, IP65 rated
203-5
Fits the common double 50mm x 25mm cut-out, which has hole centres 100mm apart. Available with one of three industry-standard drives, 5mm double bit, 8mm square or 9mm triangular. Polyamide body and die-cast zinc alloy gearbox.
203-2 - Double 50mm x 25mm cut-outs, cylinder lock or non-locking, with wing knob, for gearbox-operated rods, IP65 rated
Double 50mm x 25mm cut-outs, cylinder lock or non-locking, with wing knob, for gearbox-operated rods, IP65 rated
203-2
Fits the common double 50mm x 25mm cut-out, which has hole centres 100mm apart. Available either with a cylinder lock or non-locking. Polyamide body and die-cast zinc alloy gearbox.
 203-3 - Double 50mm x 25mm cut-outs, three point lock with T-handle, for gearbox-operated rods, IP65 rated

Double 50mm x 25mm cut-outs, three point lock with T-handle, for gearbox-operated rods, IP65 rated
203-3
Fits the common double 50mm x 25mm cut-out, which has hole centres 100mm apart. The T-handle is available either with a cylinder lock or non-locking. Polyamide body and handle, with die-cast zinc alloy gearbox.
203-4 - Double 50mm x 25mm cut-outs, three point lock with L-handle, for gearbox-operated rods, IP65 rated
Double 50mm x 25mm cut-outs, three point lock with L-handle, for gearbox-operated rods, IP65 rated
203-4
Fits the common double 50mm x 25mm cut-out, which has hole centres 100mm apart. The L-handle is available either with a cylinder lock or non-locking. Polyamide body and handle, with die-cast zinc alloy gearbox.