The 395-6-3 steel hinge is designed to be fitted to doors with a bend of either 20mm or 24mm. Both types can also be specified with an effective width of either 34mm or 40mm.

The hinge is fixed to the enclosure or frame with screws or bolts and the door part is welded on. The length is 65mm, excluding the hinge pin, and the mounting plate is 14.5mm wide and pre-drilled with two 6.5mm diameter x 12 mm mounting holes. An O ring is fitted at the bottom of the hinge pin. The finish is zinc plate. The maximum hinge rotation angle is 120°.

Typical applications include electric panels and machinery covers.

Also available in a 60mm length.