|
25mm long, polyamide body, steel or hardwearing thermoplastic pin, 180°
197-2-0
This compact corner hinge is suitable for 1.5mm thick steel panels. The hinge pin can be specified in a choice of materials and shapes.
More »
|
 |
25mm long, die-cast body, steel or hardwearing thermoplastic pin, 180°
097-1
This compact corner hinge can be specified to fit different panel thicknesses and the hinge pin can be specified in a choice of materials and shapes.
More »
|
|
25mm long, die-cast body, steel or hardwearing thermoplastic pin, increased resistance, 180°
297-1
This compact corner hinge uses a special cut-out to give increased resistance. Can be specified to fit different panel thicknesses and with a choice of hinge pin materials and shapes.
More »
|
 |
34mm long, die-cast or polyamide body, steel pin, 180°
400
This large size corner hinge is suitable for fitting to the corner of doors with 16.5mm bend and is secured by two M5 countersunk screws.
More »
|
|
37.5mm long, die-cast body, steel pin, 180°
098-1
This large size corner hinge is suitable for 2mm thick steel panels and is secured by two M6 countersunk screws.
More »
|
 |
37.5mm long, die-cast body, steel or hardwearing thermoplastic pin, stud fastening, 180°
298-1
This large size corner hinge is suitable for 2mm thick steel panels and is secured internally using the M6 bolts.
More »
|
|
50mm long corner hinge, die-cast body, double steel pins, 180°, 3 hole fixing
398-1-F-1
A twin-pin corner hinge giving 180° rotation, with three fixing holes.
More »
|
 |
50mm long corner hinge, die-cast body, double steel pins, 180°, 2 hole fixing
398-1-F-2
A twin-pin corner hinge giving 180° rotation, with two fixing holes.
More »
|
|
40mm long, die-cast body, bolt on or stud fastening, steel pin, 180°
200-1-2
This large hinge fits on the corner of doors with either a 17mm or 21mm bend and the latter can be specified to be secured by using two M6 countersunk screws or with two M6 threaded studs.
More »
|
|
45mm long, heavy duty, die-cast body, bolt on, hardened steel pin, 180°
100-1-2
This large hinge is intended for doors that are side, plain or flush mounted and comes in a choice of 11 sizes to fit doors with a bend of between 2mm and 30mm. Fitted using four countersunk screws and nuts.
More »
|
