|
8mm round rod, with eye and tapered end
IC-1
Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm standard lengths.
More »
|
 |
8mm round rod, with twin rollers and bare end
IC-2
Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm standard lengths.
More »
|
|
8mm round rod, with twin rollers and 90° offset eye end
IC-3
Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm standard lengths.
More »
|
 |
8mm round rod, with twin rollers and eye end
IC-4
Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm standard lengths.
More »
|
|
8mm round rod, with eye and bare end
IC-5
Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm standard lengths.
More »
|
 |
8mm round rod, cranked, with twin rollers and bare end
IC-6
Supplied in 400mm, 500mm, 600mm, 700mm, 800mm, 900mm and 1,000mm lengths.
More »
|
|
Rod adaptor
CT
Converts 8mm round rod used in multi-point locking systems to an eye end.
More »
|
 |
Round rod guide
CY
Polyamide guide for 8mm round rod. Available in a choice of three heights.
More »
|
|
14mm flat rod with attached twin rollers
IL-1
Supplied in the standard 1,020mm length and 14mm width, with between 13mm and 27mm of crank.
More »
|
 |
14mm flat rod with integral twin rollers
IL-2
Supplied in the standard 1,020mm length and 14mm width, with 16mm or 21mm of crank.
More »
|
|
14mm flat rod with locking pins
ILP
Supplied in customer-specified lengths, with locking pins towards both ends.
More »
|
 |
Flat rod guide
LY
Guide for 14mm flat rod, manufactured from polyamide.
More »
|
|
Twin roller catcher, die-cast
LKY-1
This die-cast roller catcher is for use with three-point locking rods featuring twin rollers.
More »
|
 |
Twin roller catcher, steel
LKY-2
This steel roller catcher is for use with three-point locking rods featuring twin rollers.
More »
|
 |
Actuator plate
30403499, 30403496, 30403495
Three actuator plates that convert quarter turn cam locks into two or three-point locks.
More »
|
